Easily Add Taxi Braking Convience to ALL . . .
Microsoft's Flight Simulator
FS2000, FS2002 & FS2004
* INSTALLATION Instructions
INSTALLING the Brake
Pedals to Gameport/USB Adapter
The Breaking Pedals were designed to be connected to you
XP computer using a device called a 'GAMEPORT to USB Box'. This Adapter
can be purchased on the Internet or on eBay.
Gameport to USB Interface. The one shown above allows 2 Gaming devices
to be connected to the USB port of your computer. You can purchase an
Interface that will allow 4 Gaming Devices to be connected via one USB
the Gameport Interface is connected, your computer will detect the
interface as 'GAMEPORT to USB BOX' as seen above.
your Flight Simulator running; goto the 'Settings - Control -
Assignments - Buttons/Keys as shown above. Locate 'Apply left brakes' ;
Click 'Program Joystick'. Press the LEFT Brake Pedal. Do the same for
the Right Pedal. Note that the REPEAT Bar is Fully to the right. This
allows continious braking. For a smooth stop, BOTH left and right pedals
can be pressed by both feet at the same time.
NOTE: You would also need to goto 'Joystick Axes' and
delete any default settings Flight Simulator made for you under
'Gameport to USB Box'.
Installing the Brake Pedals
on Your Gameport
Braking Pedals will also work with Win95, Win98 & XP systems. Just
plug the Brake Cable into the GamePort Connector. The XP computer will
sense the new hardware and load the appropriate software. If not, you
might have to install it yourself.
First, locate the 'START' icon
in the lower left hand corner of the XP computer screen and CLICK on it. Then CLICK on 'CONTROL PANEL';
then 'GAME CONTROLLERS'.
THEN CLICK 'CONTROL
THEN CLICK 'GAME
With the 'GAME
CONTROLLERS' window showing; click on 'ADD'. Then Highlight '2-axis,
2-button joystick'. Then Click 'OK'. With the Brake Pedals connected to
the Gameport; the Game Controllers window will display under 'STATUS'
the word 'OK', indicating that the driver is installed and the Brake
Pedal is recognized.
THEN CLICK 'ADD'
THEN HIGHLIGHT '2-AXIS, 2-BUTTON
JOYSTICK - THEN 'OK'
BRAKE PEDALS SENSED - STATUS - OK.
THEN CLICK 'PROPERTIES'
the Brake Pedal with your hand. With the pressing of each pedal, the
appropriate 'RED' circle will will light. With the lights turning 'On'
as required; Program your Flight Simulator as described above.
PRESS LEFT BRAKE PEDAL. NOTE #1
RED CIRCLE LIGHTS
PRESS RIGHT BRAKE PEDAL. #2 RED
CIRCLE LIGHTS - INSTALLATION COMPLETE
Microsoft Flight Simulator FS2000, FS2002,
Will work with
ALL Aircraft Configurations
(from the Piper Cub to the
Boeing 777 & MORE!)
If you Liked the Brake Pedals . . .
. . . You will Just LOVE the Cessna Avionics Panel
HERE for MORE Information on the Cessna Avionics
HAY GUYS & GALS! CHECK THIS
Cessna Style PUSH/PULL THROTTLE
with Optional Elevator Trim